Adam Professional Audio T7V T-Series Active Nearfield Monitor Kit (Pair)
- Wallet-Friendly High-Quality Monitors
- For Commercial or Project Studios
- U-ART 1.9″ Accelerated Ribbon Tweeter
- 7″ Polypropylene Woofer
- HPS Waveguide from the S-Series
- Bi-Amped Class-D Amplification
Out of stock
Adam Professional Audio T7V Overview:
Bundled together by B&H for your convenience, this Adam Professional Audio T-Series T7V Monitor Kit offers audio engineers a pair of Adam Profesional Audio speakers at a wallet-friendly price point. These are high-quality near-field active studio monitors well suited for project studios, commercial recording facilities, and broadcast environments. The speakers feature Adam’s U-Art 1.9″ accelerated ribbon tweeter, their HPS waveguide, and a 7″ polypropylene woofer. Thanks to Class-D bi-amplification, each speaker exudes a clean, low-distortion sound.
- U-ART 1.9″ Accelerated Ribbon Tweeter
- Allows longer operation with fewer signs of fatigue
- Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
- Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
- Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane
- Direct, fast response in the high-range even with complex transients
- HPS waveguide from the S Series
- Makes dispersion more consistent and imaging more stable over a wider area
- Reduction of early reflections on the surfaces of mixing consoles, desks, and more
- Lightweight polypropylene construction of the woofer
- Excellent transient response even at high sound levels without breakup of the diaphragm
- Vertical 2-way system with 7″ woofer
- High resolution of the stereo image
- Rear-firing bass reflex port
- Bass reproduction with very low compression
- Linear frequency response of 39 Hz to 25 kHz
- Unbiased reproduction in a wide frequency band
- Maximum peak sound pressure per pair in 3.3′ (1 m) 110 dB
- Powerful, compression-free sound reproduction even at very high sound levels
- DSP-powered crossover design
- Smooth frequency response without interference between the drivers in the critical midrange
- Simple room acoustic adjustments via high- and low-shelf filters
- Allows optimal adaptation to acoustically difficult listening environments or individual preferences
- Analog inputs over XLR and RCA
- Optimized for balanced and unbalanced line signals
- Acoustically optimized cabinet geometry
- Reduction of unwanted reflections on the cabinets
| Woofer | Number: 1 Basket Ø: 7.0" / 177.8 mm Cone Material: Polypropylene |
|---|---|
| Tweeter | Number: 1 Type: U-ART Diaphragm Area: 4.0" / 101.6 mm Equiv. Diaphragm Ø: 1.9" / 48.3 mm Velocity Transform Ratio: 4:1 Diaphragm Weight: 0.006 oz / 0.17 g Waveguide: HPS |
| Amplifier | Number: 2 Woofer: 1 Type: PWM (Class-D) Amplifier Power RMS: 50 W Tweeter: 1 Type: PWM (Class-D) Amplifier Power RMS: 20 W |
| Control Options | nput Sensitivity: Switchable +4 dBu / -10 dBV Gain: Yes High-Shelf: -2, 0, +2 dB Low-Shelf: -2, 0, +2 dB |
| Input Connectors | Analog: XLR, RCA Input Impedance: 10 kOhm / 20 kOhm |
| Frequency Response | 39 Hz to 25 kHz |
| THD | THD > 80 Hz: 0.5 % |
| Maximum SPL | Maximum SPL: ≥110 dB (per pair at 3.3 / 1.0 m) |
| Crossover | 2.6 kHz |
| Power | AC Mains Inputs Voltage: 100 to 240 VAC 50/60 Hz |
| Maximum Power Consumption | 132W |
| Dimensions | 348.0 x 210.8 x 292.1 mm |
| Weight | 7.1 kg |
In The Box
2 x Adam Professional Audio T7V T-Series Active Nearfield Monitor (Single)
Power Cord
Limited 2-Year Warranty
There are no reviews yet.