{"id":126604815,"date":"2024-08-14T01:06:12","date_gmt":"2024-08-13T22:06:12","guid":{"rendered":"https:\/\/shuttershopegypt.com\/?post_type=product&p=126604815"},"modified":"2026-03-15T16:19:26","modified_gmt":"2026-03-15T14:19:26","slug":"godox-tt520-ii","status":"publish","type":"product","link":"https:\/\/shuttershopegypt.com\/en\/shop-2\/godox-tt520-ii\/","title":{"rendered":"Godox – TT520 II"},"content":{"rendered":"

Introduction:<\/strong><\/p>\n

1. Power Management
\n(1) Switch to the ON, the flash will start charging (the charging indicator is dim). After several seconds, the charging indicator turns red and TT520 is ready to shoot.<\/p>\n

(2) For a test flash, press the test button. After use, press the ON\/OFF to OFF to power off.<\/p>\n

(3) If the red charging indicator lamp flickers in every 1s, it indicates low battery. In such
\ncase, the power will turn off automatically and you need to replace the batteries.<\/p>\n

2. Power Control
\n(1) The flash unit has 8 steps of power output control which indicated by 8 pieces of LED
\nlamp for different level.<\/p>\n

(2) Press \u201c+\u201d to make power higher and they are 1\/128,1\/64,1\/32,1\/16,1\/8,1\/4,1\/2,1\/1.
\nOtherwise, press \u201c-\u201d to make power lower.<\/p>\n

3. M Mode
\nPress the MODE key to M Mode. In this mode, you can set TT520 On to your camera
\nhot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the
\nflash power and press the camera shutter, the flash light will flash under the camera
\nsynchronous signal.<\/p>\n

4. S1 Mode
\n(1) Press the MODE key to S1 Mode. The Mode is applicable for slave flash in order to
\ncreate many lighting effects. It is respectively applicable for manual flash environment.<\/p>\n

(2) When the flash is S1 mode, it will fire synchronously when the master flash fires,
\ncomparable with the effect by the use of radio trigger.<\/p>\n

5. S2 Mode
\nPress the MODE key to S2 Mode. The mode is applicable for slave flash in order to
\ncreate many lighting effects. It is respectively applicable for TTL flash environment. The
\nflash unit won\u2019t flash synchronously with the first flash but the second flash from the
\nmaster flash.<\/p>\n

6. Power-saving Function
\n(1) To save battery power, the flash will enter stand-by state in about 30 minutes of idle
\nuse. Press any button to wake it up.<\/p>\n

(2) In S1\/S2 mode, the flash will enter stand-by state in about 60 minutes of idle use.
\nPress any button to wake it up.<\/p>\n

(3) In Power-saving mode, the charging indicator flickers in every 3 seconds. Other
\nIndicators are turned off.<\/p>\n

7. Protection Function
\n(1) Protection in continuous flashes
\nTo prevent the flash head from getting too hot and damage, please do not flash over 20
\ntimes when in power lever 1\/2,1\/1. Please cool down the flash unit for at least 10
\nminutes. The over-temperature protection function will be activated if you continue to
\nflash after 20 times. In this state the charging time will turn to 10-25s. Please cool down
\nthe flash unit around 10 minutes and it will turn to normal state.<\/p>\n

(2) Systematic over-temperature protection
\nWhen the inner circuit is over-heating, which indicates over use of the flash unit, the inner
\ncircuit will shut down power automatically. The flash unit will turn to normal state after the
\ninner circuit is cooled down.<\/p>\n

Package Contents:<\/p>\n

1x TT520 Speedlite
\n1x Diffuser
\n1x Flash Stand
\n1x User manual<\/p>\n","protected":false},"excerpt":{"rendered":"