-11%
, , ,

Audio-Technica ATW-1301 System 10 PRO Rack-Mount Digital UniPak Transmitter System (2.4 GHz)

Audio Technica
Key Features:
  • Digital 24-bit/48 kHz Operation
  • 2.4 GHz ISM Band
  • Automatic Frequency Selection
  • XLR and 1/4″ Outputs
  • Channel Selection, Sync, and Setup
  • Three Levels of Diversity Assurance
  • Easy-To-Read Display
  • Can be Linked to Ten Receiver Units
  • Receiver Units Can Be Mounted Remotely
  • Ground-Lift Switch

33,500 EGP 37,600 EGP

  2-4 Days Delivery

Audio-Technica ATW-1301 Overview:

The System 10 PRO ATW-1301 from Audio-Technica is a digital 24-bit/48 kHz wireless microphone system that operates on the 2.4 GHz ISM band and is used to capture audio for applications such as live stage, theater, DJ setups, and more.

The System 10 PRO features a half-rack chassis that allows you to mount one or two receiver units, however the receiver units can be released from the chassis and mounted remotely (up to 328′ away) via Ethernet cable. Up to five chassis or 10 receiver units can be linked using a RJ12 cable, creating a multi-channel system with up to 10 channels.

In addition, other features include an easy-to-read display on each transmitter and receiver unit for quick setup, clear and natural-quality sound, and three levels of diversity, namely frequency, time, and space. Frequency Diversity sends the signal on two allocated frequencies, Time Diversity sends the signal in multiple time slots, and Space Diversity uses two antennas on each transmitter and receiver unit, thus to help maximize signal integrity.

The System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one ATW-RU13 receiver unit with corresponding AT8690 receiver unit mounting brackets, one RJ12 cable, one AC adapter, and one ATW-T1001 UniPak bodypack transmitter.

Audio-Technica ATW-RC13 System 10 PRO Rackmount Chassis for ATW-RU13 Receivers
The System 10 PRO ATW-RC13 from Audio-Technica is a half-rack chassis that allows you to mount one or two ATW-RU13 receiver units (available separately) to create a wireless receiver setup that is easily rackmounted in portable flight cases or permanent installations. When combined with a transmitter and microphone, the System 10 PRO is well suited for educational facilities, conference rooms, small to mid-sized venues, and houses of worship as well as broadcast studios.

The receiver units can be released from the chassis and mounted remotely (up to 328′ away) via an Ethernet cable (available separately) for improved antenna reception. Up to five chassis (10 receiver units) can be linked using an RJ12 cable, creating a multichannel system with up to 10 channels being used simultaneously.

The easy-to-read display shows the system IDs for the paired transmitters as well as RF signal strength, link statues to additional receivers, and the remaining battery life on the transmitters. Rear-panel connections include balanced XLR and unbalanced 1/4″ output connections as well as output level controls and ground-lift switchs to help eliminate audible hum caused by ground loops.

The ATW-RC13 chassis includes rackmount hardware, a joining plate, one RJ12 cable, and an AC adapter.

Audio-Technica ATW-RU13 System 10 PRO Wireless Receiver Unit (2.4 GHz)
The Audio-Technica ATW-RU13 System 10 PRO Receiver Unit is a single-channel, digital wireless receiver designed for use with an ATW-RC13 chassis (available separately) and compatible with all System 10 transmitters.

The receiver can be rackmounted directly into the ATW-RC13 chassis. Alternately, using an Ethernet cable (available separately), the unit can be mounted remotely, at a distance up to 328′ away, for improved signal reception. A 1/4″-20 thread allows for mounting to a bracket, stand, and other fixture. The unit can also be permanently wall mounted using the included AT8690 receiver holder.

The System 10 PRO offer a maximum transmission range of 200′. Up to five chassis can be linked using RJ12 cables, creating a stable environment in which up to 10 receiver units work together, with receiving, transmitting, and frequency allocation coordinated to prevent audio dropouts.

Requires the ATW-RC13 Chassis (Available Separately) for Operation
The ATW-RU13 receiver unit requires an ATW-RC13 half-rack receiver chassis to function. The chassis can house up to two receiver units and can be mounted alone using the included mounting brackets and screws. Two chassis can be mounted side-by-side using the included joining plate, allowing four wireless mic channels to occupy a single 19″ rackspace for a compact multichannel installation.
Rear-panel connections include balanced XLR and unbalanced 1/4″ output connections as well as output level controls and ground-lift switchs to help eliminate audible hum caused by ground loops.
Compatible with a Wide Variety of Transmitters and Microphones
Audio-Technica’s System 10 PRO offers a bodypack transmitter with a variety of lavalier, headset, and earset microphone options as well as a handheld transmitter with an integrated mic capsule. Boundary mics and desktop transmitters are also available for conferences and corporate events.
ATW-T1001 Bodypack Transmitter

The low-visibility, miniature MT830cW lavalier microphone delivers a natural sound optimized for speech intelligibility. Its omnidirectional polar pattern ensures that the sound remains consistent, even when the speaker’s head moves away from the mic.
The AT831cW mini cardioid lavalier mic offers a narrower, feedback-resistant pickup pattern for louder events.
The discreete PRO-92cW earset mic provides improved clarity in spoken word applications.
The AT-GcW guitar cable lets you connect the bodypack transmitter to a guitar or bass.
ATW-T1002 Handheld Transmitter/Mic

The ATW-T1002 handheld transmitter/mic is available for presenters and performers who prefer the flexibility of a handheld microphone.
The integrated microphone features a dynamic hypercardioid capsule that tightly focuses audio capture on the subject directly in front of the mic, minimizing unwanted background noise and feedback.
Video Conferencing

The ATW-T1006 boundary transmitter/mic is designed for tabletop use, ideal for applications such as video-conferencing where minimum visibility is required.
Conferences/Boardrooms

The ATW-T1007 base transmitter can be used with a gooseneck mic on a table for situations where wired mics are impractical.
Clear Digital Audio That’s Easy to Set Up and Operate
Digital Audio Quality
The System 10 PRO offers full-bandwidth, 24-bit/48 kHz digital audio with none of the audio artifacts associated with analog companding.
Automatic Frequency Selection

Just power up the receiver and it automatically seeks out a clean frequency, saving you the hassle of scanning and shortening setup time.
While in use, the system continually monitors activity in the 2.4 GHz Wi-Fi range and automatically switches to a clean frequency to avoid interference if necessary.
Pairing Multiple Transmitters

With this peer-to-peer system, a transmitter (available separately) can only transmit to one receiver at a time. However, up to 10 transmitters can be paired with a receiver ahead of time. This is useful in situations when you have multiple speakers, one after another, and you need to have them miked up and ready to go. All you’ll have to do is turn one transmitter off and the next one on.
Three Levels of Diversity Assurance to Avoid Dropouts
Triple Diversity Reception Maximizes Wireless Signal Integrity
Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.
For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.

2.4 GHz Wi-Fi Band

Unlike traditional analog wireless systems, the System 10 operates in the 2.4 GHz ISM band, away from interruptions and dropouts caused by TV and radio channel interference.

Audio-Technica ATW-T1001 System 10 Digital Wireless Bodypack Transmitter (2.4 GHz)
The Audio-Technica ATW-T1001 is a digital wireless bodypack transmitter compatible with System 10 and System 10 Pro receivers. The compact transmitter delivers high-quality sound at 24-bit / 48 kHz resolution and features a lightweight plastic housing that is comfortable for presenters and performers to wear.

The unit features a Hirose 4-pin input connector, allowing you to plug in a compatible lavalier or headset microphone of your choice for hands-free presentations and performances, or a dedicated AT-GcW instrument cable for use with a guitar or bass (mics and cable available separately). The gain range is adjustable with the included screwdriver, allowing the unit to accommodate varying input levels. The power button toggles between mute and unmute statuses with a quick press and can be locked to prevent accidents.

The System 10 operates anywhere in the world in the 2.4 GHz spectrum, well away from potential TV and radio interference. The transmitter’s RF output is fixed at 10mW and the unit offers a maximum transmission range of 200′. Three levels of diversity assurance—frequency, time, and space—ensure reliable audio transmission.

Syncing the transmitter to a receiver is simple; choose one of the ten system ID numbers on the receiver, then press the Pair buttons on the receiver and the transmitter, and that’s it— you’re ready to go. Up to 10 transmitters can be paired to a single receiver before the start of an event, allowing you to quickly switch between speakers by turning their respective transmitters on or off. The system LED displays the ID number while the indicator LED shows power, mute, and battery status.

Sample Rate/Resolution

48 kHz / 24-Bit

Dynamic Range

>109 dB (Typical)

Form Factor

Rackmount

Receiver Module Capacity

2

AC/DC Power Adapter

12 VDC at 0.5 A (Included)

AC Input Power

100 to 200 VAC, 50/60 Hz

Display & Indicators

1 x LCD (RF Level, Sync, Transmitter Battery Status)

Receiver Type

Receiver Module

Mounting Options

Rackmount (with Optional Hardware)
1/4"-20 Female

Rackmount Size

1 RU (1/2 Rack)

Antenna

2 x External, SMA (Front-Mount)

Number of Audio Channels

1

Audio I/O

1 x XLR 3-Pin Male Balanced Output (Lockable)
1 x 1/4" 3-Pin Female Unbalanced Output

Audio Output Level

XLR Output : 0 dBV (Balanced)
1/4" Output : +6 dBV (Unbalanced)

Frequency Response

20 Hz to 20 kHz (Dependent on Mic)

Network I/O

1 x RJ12

Power Requirements

AC/DC Power Adapter

Wireless Technology

Digital 2.4 GHz

Diversity

Frequency, Time & Space Diversity

RF Frequency Band

2400 to 2483.5 MHz

RF Channel Scanning

Auto-Scan

Max Operating Range

200' / 61 m (Line of Sight)

Max Transmitters per Band

10

Latency

3.8 ms

In The Box

  • Audio-Technica ATW-RC13 System 10 PRO Rackmount Chassis for ATW-RU13 Receivers
  • AC Adapter
  • RJ12 Link Cable
  • Audio-Technica AT8631 Joining Plate for Two Wireless Receivers
  • Rackmounting Hardware
  • 4 x Rubber Feet
  • Audio-Technica ATW-RU13 System 10 PRO Wireless Receiver Unit (2.4 GHz)
  • 2 x Antennas
  • AT8690 RU13 Holder
  • Audio-Technica ATW-T1001 System 10 Digital Wireless Bodypack Transmitter (2.4 GHz)
  • Belt Clip
  • Gain Adjustment Screwdriver
  • Power Supply
  • AC Adapter
  • Link Cable
  • Rack-Mount Adapters
  • Rubber Feet

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Audio-Technica ATW-1301 System 10 PRO Rack-Mount Digital UniPak Transmitter System (2.4 GHz)”

There are no reviews yet.

SHOPPING CART

close