The Magnus VT-3000 Tripod with Fluid Head and Tripod Dolly Kit by B&H provides you with a sturdy tripod, fluid head capable of handling DSLRs and small to medium sized camcorders and a dolly for creating smooth cameras moves on a flat surface. The fluid head features a 65 mm half ball for quick leveling adjustments and a QR plate. The fixed counterbalance works to keep the camera weight neutral on the head, so you don’t have to fight the weight of the camera as you tilt. Separate pan and tilt locks secure the head, while allowing you to still move in one axis while locked down in the other.
The aluminum legs feature a two-stage design that is stable, and features a working range of 28.6 to 61″. The mid level spreader avoids instability that can occur when using a tripod with a ground level spreader on uneven ground. The dolly accommodates the tripod, and each leg bar features over four inches of length adjustment allowing you to use the dolly with many different tripods. The wheels feature independent foot actuated wheel locks. When fully extended the dolly features a 31″ doorway width, providing a stable base for your shot, and the dolly can still roll through most doors without having to be disassembled.
The Magnus VT-3000 Tripod System with Fluid Head is a stable, sturdy video tripod made from anodized aluminum that can support loads up to 6.6 lb. It provides many features commonly found on more expensive models. The two-way fluid head provides smooth operation, and features a half-ball mount with a diameter of 65mm, with left and right pan bar mounts. One pan bar comes included. The VT-3000 tripod system weighs 7.75 lb.
The 3-section leg design allows you to adjust the height of the tripod from 28.6″ to 61″. A mid-level spreader and passive counterbalance provide improved stability. The VT-3000 has separate pan and tilt locks and a bubble level for precision leveling, and offers a full 360° pan range. The fixed counterbalance spring incorporated in the head provides smoother tilt movements.
The included quick-release plate features a standard 1/4″-20 mounting screw with a video pin, and features a micro balance slider.
- Supports loads up to 6.6 lb (3 kg)
- Features a 65mm ball base
- Two-way fluid head for smooth motion
- Fixed counter-balance spring provides smoother tilt movements
- Three-section leg design allows you to adjust the height of the tripod from 28.6″ to 61″
- Middle spreader provides enhanced stability by holding the tripod legs in locked position
- Provides fixed counter balance, pan, and tilt drag
- Quick-release plate is included
- Ground spikes for outdoor use and convenient retractable rubber feet for delicate floor surfaces
- Weighs 7.75 lb (3.5 kg)
The Magnus DWF-2 Universal Tripod Dolly presents a simple, affordable way to put your tripod on wheels. The dolly features 2″ ball-bearing metal/rubber wheels that feature revolving assemblies. That means you can steer your tripod along any line imaginable to capture a smooth tracking shot.
The DWF-2 dolly bears loads up to 33 lb and features adjustable clamps to lock just about any size of tripod foot into place securely. Mounting a tripod is easy: Just line up each tripod foot and twist the thumb screws to tighten each clamp.
Each leg bar extends up to 4.9″ to accommodate tripods of various dimensions, and flip locks secure the extension. Fully extended, the dolly has a doorway width of 31″. With step-on locks for each wheel, you can easily transform your rolling tripod into a sturdy lock-down mount for your camera.
Two of the legs fold down to create a compact package for transport – the dolly folds down to just 17 x 5″.
- Step on the wheel locks to brake the spinning of the wheels and the rotation of the wheel assemblies
- Spring-loaded stoppers automatically lock the legs in the open position when they’re rotated out – easily pull them up to rotatethe legs back into the closed position
- Sturdy carry handle
- Hook & loop strap to secure legs in a tidy package for transport
- Carry bag with shoulder strap
There are no reviews yet.