-9%
, ,

Rode VideoMic with Rycote Lyre Suspension System

Rode
Key Features:
  • Mobile Journalist, Vlogger, Run & Gun
  • For Cameras and Portable Recorders
  • 100-Hr Run Time via 9V Battery
  • Selectable Pad and Bass Roll-Off
  • Attached 3.5mm TRS Output Cable
  • Power Switch with LED
  • Windscreen Reduces Wind Noise
  • Integrated Shoe/Pole Shockmount

7,500 EGP 8,200 EGP

  2-4 Days Delivery

Rode VideoMic Overview:

The VideoMic with Rycote Lyre Suspension System from Rode is a shotgun microphone that can easily be mounted on a DSLR camera. It features a Rycote suspension system that attaches to the camera’s shoe. The VideoMic is lightweight, and when mounted on a camera it does not appear in the frame. The VideoMic can also mount to Rode’s boompoles for elevated audio capture. Its supercardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances.

The included Rycote Lyre is a non-elasticated suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticated suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness.

An attached, coiled cable terminates to a 1/8″ (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9V battery (sold separately). The microphone will run for approximately 100 hours on a single battery.

Barrel-Canceling Pickup
The Rode Video Mic functions as a true line+gradient microphone with a supercardioid pattern in the front and a barrel that cancels side audio. The result is maximum pickup of the source in highly ambient and noisy environments.
Selectable 10 or 20 dB Pad
When capturing audio in loud environments, the VideoMic offers built-in attenuation. The selectable 10 or 20 dB pad lessens the microphone’s sensitivity, allowing it to handle higher SPL levels without sacrificing clarity.
High-Pass Filter Switch
A high-pass filter switch eliminates room ambiance and noise below 80 Hz. This results in improved intelligibility while recording around machinery, wind or close proximities.
Internal Power
The condenser element is powered with a standard 9V battery for up to 100 hours (approximately).
Form Factor

Stand/Boom Mount

Sound Field

Mono

Operating Principle

Line Gradient

Capsule

Electret Condenser

Diaphragm

0.5" / 12.70 mm

Polar Pattern

Supercardioid

Orientation

End Address

Circuitry

Solid-State (JFET)

Pad

-10 dB
-20 dB

High-Pass Filter

80 Hz

Tone Adjustment

None

Gain Adjustment

None

Indicators

1 x Single LED (Power)

On-Board Controls

High-Pass Filter, Pad, On/Off

Windscreen

Foam (Included)

Frequency Range

40 Hz to 20 kHz

Maximum SPL

134 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)

Off-Axis Rejection

4 dB at 60°
16 dB at 120°
12 dB at 180°

Impedance

200 Ohms

Sensitivity

-38 dBV/Pa at 1 kHz

Output Level

6.9 dBu (Max)

Dynamic Range

114 dB

Signal-to-Noise Ratio

74 dB A-Weighted

Equivalent Noise Level

20 dB A-Weighted

Output Connectors (Analog)

1 x 1/8" / 3.5 mm TRS

Number of Conductors

2

Wireless Connectivity

None

Operating Voltage

9 V (Battery Power)

Operating Current Consumption

5 mA

Battery Type

1 x 9 V (Not Included)

Approximate Battery Life

100 Hours

color

Black

Mounting

Camera/Shoe-Mount, Shockmount (via Integrated Hardware)

Mounting Thread Size

3/8"-16 Female

Included Case

None

Construction Material

ABS

Weight

In The Box

  • Rode VideoMic Camera-Mount Shotgun Microphone

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rode VideoMic with Rycote Lyre Suspension System”

There are no reviews yet.

SHOPPING CART

close