Samson Resolv SE5 Two-Way Active 5inch Studio Monitor (Single)
- 5″ Carbon Fiber Woofer and 1.25″ Tweeter
- 70 Watts RMS
- 1/4″ TRS and RCA Inputs
- 4-Position High Frequency Lift Control
- Active Crossover with Multi-Pole Design
- Solid MDF Construction
10,750 EGP 11,400 EGP
2-4 Days Delivery
Samson SE5 Overview:
Each Resolv SE5 Two-Way Active 5″ Studio Monitor from Samson features 70 watts of power, a dedicated power amp and an electronic crossover. The 5″ woven carbon fiber woofer provides tight and controlled low frequency response, while its 1.25″ soft dome tweeter gives the high frequencies a natural sound without unwanted resonance. The Resolv SE5 also includes a 4-position high frequency lift control, allowing the monitor to be optimized for different mixing environments.
This Resolv’s enclosure is constructed of solid MDF. Inset into the panel is a time-aligned waveguide that allows for a wide listening area with minimum diffraction. The SE5 is AV shielded for seamless operation near CRT monitors and other sensitive electronics. The rear panel has a balanced 1/4″ TRS input as well as an unbalanced RCA input. Additionally, the front ports are slotted with rounded inner edges, helping reduce port noise at high SPLs.
Monitor Type | Active 2-Way |
---|---|
Enclosure | Bass-Reflex, Shielded |
Drivers | HF Driver: 1 x 1.25" / 3.17 cm Silk Dome Tweeter |
Amplification | HF Amplifier: Rated at 20 W |
Frequency Response | 45 Hz to 27 kHz ± 3 dB |
Protections and Limiting | Fuse |
EQ | 1 x HF Shelf: -2 to +4 dB at 4 kHz (2 dB Increments) |
Crossover Frequency | 3.2 kHz, 24 dB/Octave Slope |
Crossover Type | Linkwitz-Riley |
Audio I/O | 1 x 1/4" TRS Balanced Analog Input (10 Kilohms) |
Power Consumption | 125 W |
Enclosure Material | MDF |
Dimensions | |
Weight |
In The Box
- Samson Resolv SE5 Two-Way Active 5″ Studio Monitor (Each)
- Power Cable
There are no reviews yet.