Silence Corner Atoll C Rotating Camera Collar

Silence Corner

Key Features:

  • The quickest, easiest and most innovative solution to rotate the camera between portrait/landscape orientation
  • 10 x Faster than using an standard L-bracket plus the center of gravity is more stable than using an L-bracket
  • L-Brackets need to be released from tripod clamp, re-positioned and fixed back to the tripod clamp = Atoll simply requires a knob to unlocked and the camera can be freely rotated between portrait and landscape
  • When rotating Atoll there is 3 click points at 0, 90, 180 degrees to ensure the image remains level
  • Compatible with ALL Tripods – Atoll features an Arca Swiss compatible foot and is instantly compatible with all Arca compatible heads or use the 1/4″ mount with any other tripod.
  • Quickly change lenses without needing to remove the Atoll or remove the camera from a tripod
  • Fully compatible with ALL tilt and articulating screens
  • Compatible with selected mirrorless cameras, see compatibility chart below.

8,249 EGP 12,922 EGP

  Next Day Delivery

Silence Corner Atoll C for Mirrorless Cameras

The Atoll from Silence Corner will be a welcome solution if you frequently shoot in horizontal and vertical formats. 

The Atoll is a rotating collar that attaches to your camera body so you can quickly rotate the camera from portrait to landscape orientation. This is common for landscape photographers, Real Estate photographers, studio Portrait photographers, and content creators who also need to film in vertical and horizontal formats. 

Unlike a traditional L-Bracket, the Atoll doesn’t need to be removed from the tripod head to change orientation. Simply release the locking knob and rotate the camera. Changing from Portrait to landscape orientation is super fast and easy. Another benefit over traditional L-Brackets is that the Atoll doesn’t interfere with cameras that have fully articulating screens. Screens can be fully moved and positioned without any compromise. When positioned at 180 degrees, the Atoll can be used under the tripod when it’s inverted for low-angle or macro shooting. 

The Atoll has tactile indicators at 0°, 90°, and 180° to ensure your alignment is maintained. As the camera is mounted with the sensor positioned in the center of the Atoll, as you rotate, the center point of your image is maintained. This is particularly useful when composing your image. 

The ring is attached to the camera via the 1/4inch tripod mount and doesn’t contact the lens. This allows you to change lenses while it is mounted quickly and easily. The Atoll is constructed from aircraft-grade aluminium alloy and is rugged yet remarkably lightweight. 

The mounting foot on the Atoll is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps on the market. The second plate under the camera is also Arca-Swiss compatible and additionally compatible with various capture clip-style accessories. 

The Atoll is available in three sizes Atoll S, Atoll C, and Atoll D. 

They are compatible with many cameras and lenses, including DSLR and Mirrorless cameras from Canon, Fujifilm, Leica, Nikon, Olympus/OM, Sony, and Panasonic. Additional Extender and Heightening plates are available separately and assist in dialing in the correct fit on smaller or differently shaped camera bodies.

Compatible Cameras
Canon: R6 II, R6, R5, R
Leica: SL2, SL

Compatible Cameras with Additional Heightening Plate
Canon: RP, R7, R10 (required)
Nikon: Z7 II, Z7, Z6II, Z6, Z5 (recommended); Z30, Z50, Zfc (required)
FUJIFILM: X-H1, X-T3, X-T2 (required)
Panasonic: GX8, GX9, G85, S5 (required)
Olympus: EM5 III, EM5 II (required)

Operational Restrictions
Inner Diameter: 75mm
The diameter of most Sigma and Tamron f/2.8 DSLR lenses exceeds the inner diameter of the Atoll and cannot be mounted
Cameras with a protruding pentaprism / pop-up flash housing may only provide 135° of rotation
IR remote ports or function buttons on the front of the camera may be covered by the Atoll S
Compatible with Sigma MC11 adapter
Not Compatible Sony LA-EA5 adapter, Metabones adapter or select other adapters
Not compatible with tilt/shift lenses
Some cameras bodies may require the use of a Heightening Plate, available separately
Not compatible with flagship cameras (like Canon 1DX/Canon R3/Nikon D4/Nikon Z9)
Not compatible with medium format cameras (like FUJIFILM GFX 100S)
Not compatible with camera with battery grips or body cages

Mounting Screw

1 x 1/4"-20 Male

Tripod Mounting Thread

1 x 1/4"-20 Female






Black, Silver

In The Box

  • Ring Base X1 :  Max Lens Diameter 75mm
  • Camera Plate X1 : Standard Plate-Dark Silver Color
  • 4mm hex wrench X1
  • 3mm hex wrench X1
  • Spare Link Screw X2
  • Spare 1/4″-20UNC Screw X1

Based on 0 reviews

0.0 overall

Be the first to review “Silence Corner Atoll C Rotating Camera Collar”

There are no reviews yet.

You may also like…