, ,

Sony ECM-MS2 Stereo Electret Condenser Microphone

Sony
Key Features:
  • Short and Compact
  • Stereo and Mono Operation
  • 80 Hz to 20 kHz Frequency Response
  • 48V Phantom Power
  • 3-Pin XLR Output
  • Includes Furry Windscreen

30,001 EGP

  12-20 Days Delivery
Add to Wishlist

Sony ECM-MS2 Overview:

The Sony ECM-MS2 Stereo Electret Condenser Microphone is designed for mounting on professional camcorders equipped with 2 XLR inputs and phantom powering. The microphone also delivers good sound performance in field and studio-production applications. The MS microphone signal of the ECM-MS2 microphone is internally decoded, and provides L and R (stereo) outputs. The MS2 stereo microphone also supports mono operation by simply unplugging the right channel (disabling phantom power from the right channel XLR connector).

Compact Design
The compact 5.39″ (137mm) length of the microphone prevents inadvertent vignetting of the microphone when it is attached to a handheld professional camcorder such as the PMW-100. Additionally, this short length is convenient when packing and transporting the microphone with a compact camcorder.
Stereo & Mono Operation
The microphone offers mono operation when stereo is not required, simply by cutting off the power supply to the right channel; for example, when a wireless microphone system is connected on 1 channel or while recording environmental sounds on the other channel. The microphone is designed for applications such as news gathering and documentary shooting on location.
Professional Quality
Professional quality is assured through the XLR3P’s outputs, which enable connection to professional camcorders for 48V phantom powering. The microphone’s metal body also enhances audio performance by blocking vibration, resonance, and RF noises.
Handy Accessory
The supplied furry windscreen is used to suppress the strong wind present in typical harsh-climate operating conditions. A cable tie is also supplied to fasten the unplugged microphone cable during mono operation.
Compatibility
This microphone is compatible with PMW-100, NEX-FS700, and HXR-NX30 Camcorders
SKU: SOECMMS2 Categories: , , Tags: , , , , , , ,
Frequency Response

Stereo: 80 Hz to 20 kHz Mono: 70 Hz to 20 kHz
Directivity

Unidirectional
Output Impedance

30 Ohms ±20%, balanced
Sensitivity

Stereo: -32 dB (deviation ±3 dB)
Signal-to-Noise Ratio

69 dB or more (IEC 179 A-weighted, 1 kHz, 1 Pa)
Noise

Inherent: 25 dB SPL or less
Wind: 45 dB SPL or less (with windscreen)
65 dB SPL or less (without windscreen)
Induction: 0 dB SPL/1 x 10-7 T (1 mG) or less (from external magnetic field)
Maximum Sound Pressure Level (SPL)

125 dB SPL or more (input level for 1% waveform distortion at 1 kHz, converted into equivalent input sound pressure level)
Dynamic Range

100 dB SPL or more
Operating Temperature

32 to 122°F (0 to 50°C)
Storage Temperature

-4 to 140°F (-20 to 60°C)
Type

Back electret condenser microphone
Stereo: MS (Mid-Side) stereo microphone
Power Supply

External power supply of 40 to 52 VDC (IEC 61938 P48)
Power Consumption

Stereo: 3 mA or less x 2 Channel
Output Connector

2x Cannon XLR-3-12C type
Dimensions

0.96 x 5.5" (24 x 137 mm)
Weight

Approximately 5.6 oz (160 g)

In The Box

  • Sony ECM-MS2 Stereo Electret Condenser Microphone
  • Windscreen
  • Cable Tie
  • Operating Instructions

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Sony ECM-MS2 Stereo Electret Condenser Microphone”

There are no reviews yet.

Related products

SHOPPING CART

close