Rode VideoMic GO Lightweight On-Camera Microphone
⁦Rode VideoMic GO Lightweight On-Camera Microphone⁩ - الصورة ⁦2⁩
⁦Rode VideoMic GO Lightweight On-Camera Microphone⁩ - الصورة ⁦3⁩
⁦Rode VideoMic GO Lightweight On-Camera Microphone⁩ - الصورة ⁦4⁩
,

Rode VideoMic GO Lightweight On-Camera Microphone

Rode

دلائل الميزات :

  • صحفي متنقل، مدون فيديو، Run & Gun
  • For Cameras and Portable Recorders
  • يعمل على الطاقة الإضافية
  • عملية بسيطة مع عدم وجود ضوابط
  • 3.5mm TRS Output Jack
  • Detachable Coiled 3.5mm Cable
  • مدمجة وخفيفة الوزن
  • الزجاج الأمامي يقلل من ضوضاء الرياح
  • Integrated Shoe/Pole Shockmount

4,500 جنيه مصري

  التسليم خلال 2-4 أيام
مقارنة

Rode VideoMic GO Overview:

 

ال VideoMic GO Lightweight On-Camera Microphone من Rode is a lightweight microphone which adds high-quality audio recording to your small camcorder and HDSLR camera. At only 2.6 ounces, the microphone keeps your camera setup lightweight, making it ideal for handheld shooting. It features an integrated Rycote Lyre shock mount for isolation from bumps and vibration, and offers battery-free operation, using instead the plug-in power from your camera’s 3.5mm microphone input. Please note that the microphone will not work with cameras that don’t supply plug-in power to their 3.5mm audio input jack.

The VideoMic GO is a directional microphone. It utilizes a supercardioid polar pattern to attenuate sounds from the sides, resulting in a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances. The integrated shoe mount provides a 3/8″ thread for additional mounting options. A foam windshield and 7.9″ dual mono 3.5mm coiled output cable is included.

Lightweight Design
At only 2.6 ounces, the VideoMic GO is ideal for run-and-gun HDSLR recording without the additional weight of larger on-camera microphone options.
Integrated Rycote Lyre Shock Mount
Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and won’t wear out, sag, snap, or require any rethreading to maintain its effectiveness.
لا حاجة للبطارية
The VideoMic Go does not require batteries for operation, but instead uses the plug-in power supplied via your camera’s 3.5mm microphone input. Simply plug in, and you’re ready to record.
ميزات إضافية
  • Reinforced ABS construction
  • Foam windshield
  • Integrated shoe mount with 3/8″ thread
  • 3.5mm TRS mini-jack audio output connection
رمز المنتج: ROVMG التصنيفات: , الوسوم: , , , , , ,
شكل عامل

حامل/جبل بوم
Sound Field

Mono
Operating Principle

Line Gradient
Capsule

مكثف الإلكتريت
Diaphragm

0.5" / 12.70 mm
النمط القطبي

فائق القلب
Orientation

عنوان النهاية
Circuitry

Solid-State (JFET)
الزجاج الأمامي

رغوة (مضمنة)
Frequency Range

100 Hz to 16 kHz
Maximum SPL

120 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection

4 dB at 60° 16 dB at 120° 12 dB at 180°
Sensitivity

-35 dBV/Pa at 1 kHz
النطاق الديناميكي

96 dB
نسبة الإشارة إلى الضوضاء

60 dB A-Weighted
Equivalent Noise Level

34 dB A-Weighted
Output Connectors (Analog)

1 x 1/8" / 3.5 mm TRS
Cable Length

7.87 to 13.78" / 20 to 35 cm
Number of Conductors

2
Wireless Connectivity

لا يوجد
Operating Voltage

2.5 V
Operating Current Consumption

330 µA (Plug-In Power)
اللون

أسود
تصاعد

Camera/Shoe-Mount, Shockmount (with Included Hardware)
Mounting Thread Size

3/8"-16 Female
Included Case

لا يوجد
Construction Material

ABS
الوزن

73 g

في الصندوق

  • Rode VideoMic GO Camera-Mount Shotgun Microphone
  • Coiled 3.5mm TRS Cable

بناءً على مراجعة 0

0.0 بشكل عام
0
0
0
0
0

كن أول من يقيم “Rode VideoMic GO Lightweight On-Camera Microphone”

لا توجد مراجعات بعد.

منتجات ذات صله

عربة التسوق

غلق