Accessories
Showing 49–79 of 79 resultsSorted by latest
-
Accessories, Audio, Location Sound Wireless Microphones, Microphones
Audio-Technica AT899cH Subminiature Omnidirectional Condenser Lavalier Microphone (Black)
Accessories, Audio, Location Sound Wireless Microphones, MicrophonesAudio-Technica AT899cH Subminiature Omnidirectional Condenser Lavalier Microphone (Black)
Key Features:- For Stage and Broadcast
- 20 Hz to 20 kHz Frequency Response
- 11 to 52V Phantom Power
- 4-Pin XLR Output Connector
- Frequency Roll-Off Switch
- Windscreens Included
- Carrying Case Included
SKU: AUAT899CH -
-
Accessories, Audio
On-Stage MA-100 3-8inch Male to 5-8inch Female Mic Screw Adapter
Key Features:
- Our MA-100 3/8″ Male to 5/8″ Female Mic Screw Adapter quickly and easily allows European booms and accessories to fit standard stands.
- This adapter features a knurled outer flange for ease of tightening and loosening. Chrome finish.
- Converts mic stands from 5/8″ male to 3/8″ male threading
- Knurled outer flange increases grip for ease of tightening and loosening
- Enables use of standard mic stands with European mic accessories
SKU: ONMA100 -
Accessories, Audio
LENSGO HAND HELD SIMPLE BRACKET L2SE FOR SMARTPHONE
Key Features:
- 1. Specially designed for mobile phone recording, while holding the mobile phone, you can also expand the microphone, flashlight and other equipment.
- 2. Made of quality ABS plastic, lightweight, strong, durable.
- 3. Lightweight and portable, easy to carry and use.
- 4. With 1/4-inch screw hole at the bottom, the table can be installed on the tripod, tripod, use for mobile phone live broadcast or Video Recording.
- 5. Suitable for 6.2-8.2 cm / 2.4-3.2 inches phone width.
SKU: L2SE -
Accessories, Audio
Tripod Boom Microphone Stand
Key Features:
Tripod boom microphone stand holds microphone securely in place (microphone clip sold separately) Long boom arm with molded plastic counterweight for horizontal placement Versatile design folds flat for use as straight mic stand Sturdy steel construction; ultra-light for easy transport Compatible with 3/8-inch to 5/8-inch adapter; clip-on cable holder keeps cords out of the way Please note the following while using this product: Max microphone weight ≤ 1KG (2 lbs). Microphone end of the boom should be lined up with one of the legs. Do not extend length further than 2/3 of the whole boom. To be used only on flat ground. If using heavy microphone, add a sandbag or weight on the rear of the boom to provide balance.
SKU: TBMS -
Accessories, Audio
NB-39 Adjustable 110cm Studio Microphone Suspension Boom Scissor Arm Stand
Max. Microphone Clip Diameter is 1.26″/32mm. 2.Microphone and Filter Shield Mask NOT Included. Composed of 2 pieces: (1)Scissor Arm Stand with Handheld Microphone Clip for Handheld Microphone and (1)Table Mounting Clamp. The scissor arm stand is made out of all steel construction, sturdy and durable Folding type, convenient to carry. Stable, tough, and affordable. Can be mounted on the announcers’ table. The double-braced arms add strength. Your microphone is held safely on this scissor arm microphone clip
SKU: NB-39 -
Accessories, Audio
Auray PFSS-55 Pop Filter with Gooseneck with Springloaded Clamp (5.5inch Pop Filter and 13.5inch Gooseneck)
Accessories, AudioAuray PFSS-55 Pop Filter with Gooseneck with Springloaded Clamp (5.5inch Pop Filter and 13.5inch Gooseneck)
Key Features:- 5.5˝ Double-Layered Nylon
- 13.5˝ Gooseneck
- Prevents Vocal Pops
- Protects Mic from Corrosive Moisture
- Clothespin Clamp for Desks and Stands
- Locking Nut for Secure Hold
- Spring-Loaded Clamp for Easy Mounting
SKU: PFSS-55 -
Accessories, Audio, Studio Recording
Auray WHF-158 Foam Windscreen for 1-5-8inch Diameter Microphones
Accessories, Audio, Studio RecordingAuray WHF-158 Foam Windscreen for 1-5-8inch Diameter Microphones
Key Features:- High-Quality Acoustic Foam
- Reduces Wind Noise up to 8 dB
- Reduces Vocal Plosives
- Protects Mic from Moisture and Dirt
- For Microphones 1-5/8″ in Diameter
- Colors Help You Identify Mics Onstage
SKU: AUWHF158 -
Accessories, Audio
Zoom U-44 Audio Interface
Key Features:
- Musicians, Songwriters, and Producers
- USB Type-A Connectivity
- 2 Mic Preamps, Zoom Mic Capsule Input
- 1 Headphone Output, 4 Line Outputs
- Up to 24-Bit / 96 kHz Resolution
- Battery or Bus Power / Mac, Windows, iOS
- Phantom Power, Zero-Latency Monitoring
- Tactile Controls
- MIDI and S/PDIF I/O, Output Mute Buttons
- DAW Software and iPad App
SKU: ZOZU44 -
-
Accessories, Location Sound Wireless Microphones
Zoom SGH-6 Shotgun Microphone Capsule for H5 and H6 Recorders
Accessories, Location Sound Wireless MicrophonesZoom SGH-6 Shotgun Microphone Capsule for H5 and H6 Recorders
Key Features:
- Use with the H5 and H6 Recorders
- Directional Shotgun Mic
- Three Internal Microphones
- Built-In Preamp
- Super-Cardioid Polar Pattern
- Designed for Film, ENG and More
- Hairy Windscreen Included
SKU: ZOSGH6 -
Accessories, Audio
Samson QH4 Headphone Amp
Key Features:- 4-Channel Stereo Headphone Amplifier
- 4 Stereo 1/4″ Headphone Outputs
- 4 Discrete Stereo Amplifiers
- 564mW Per Channel
- Separate Volume Control on Each Channel
- For Headphones Between 16 & 600 Ohms
- 2 Balanced 1/4″ Input Jacks
- Stereo 3.5mm Auxiliary Input & Output
- Master Volume, Mute & Mono Summing
- Suitable for Studios & Portable Studios
SKU: SAQH4 -
Accessories, Audio
Zoom APH-6 Accessory Pack for the Zoom H6 Handy Digital Recorder
Key Features:
- Wired Remote Controller
- Hairy Windscreen
- AC Adapter
- The APH-6 Accessory Pack is an accessory for the Zoom H6 Handy digital recorder. It includes the RCH-6 wired controller for remote access to your H6, the AD-17 USB-type AC adapter, and the WSH-6H Hairy
- Windscreen for improved wind diffusion.
SKU: ZOH6AP -
Accessories, Audio
Focusrite Scarlett Solo 2×2 USB Audio Interface (3rd Generation)
Key Features:- Singers, Guitarists, Solo Podcasters
- USB Type-C Connectivity
- 1 Mic Preamp & 1 Instrument/Line Input
- 1 Headphone Out, Stereo Monitor Out
- 24-Bit / 192 kHz Converters
- Bus Powered / Mac, Windows, iPad Pro
- Phantom Power, Direct Monitor
- Mic Air Mode, Multicolor Gain Halos
- Compact, Rugged Housing
- DAWs, VIs, Loops & Samples
SKU: FOSCARSOLO3G -
-
-
Accessories, Audio
Rode Deadcat Wind Muff Microphone Cover for VideoMic, NTG1, and NTG2 Microphones
Key Features:
- Compatible with Rode NTG-1, NTG-2, NTG-3, VideoMic
- Minimizes wind noise when recording in high wind conditions
- Made of specially designed artificial fur
- Acoustically transparent
SKU: B000BH437S -
Accessories, Audio
InnoGear Microphone Suspension Mic Clip Adjustable Boom Studio Scissor Arm Stand for Blue Yeti Snowball Microphone
Accessories, AudioInnoGear Microphone Suspension Mic Clip Adjustable Boom Studio Scissor Arm Stand for Blue Yeti Snowball Microphone
- Upgraded Desk Mount: Compared with old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2″ to fit most desktop.
- The Diameter of Microphone Clip is 1.10″. Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc. Attach your Blue Snowball and Blue Yeti with the 5/8″-27 male to 3/8″-16 female threaded screw adapter.
- Note：The mounting hole on the Yeti Mic is sometimes just a tiny fraction bigger than the 5/8’’ industry standard. Suggestion: Please use Thread Tape (included) to wrap around the mounting screw on your shock mount, effectively increasing the thickness of the mounting screw, while still maintaining the actual screw thread, so you can connect your Yeti.
SKU: B01L3LL95O
