-
×
Audio-Technica AT8035 Long Shotgun Microphone
1 × 21,800 EGP -
×
Nanlite PavoTube II 15C RGB LED Tube Light 2 inch
1 × 11,599 EGP
Subtotal: 33,399 EGP
Audio, Microphones
Audio-Technica AT875R Short Shotgun Microphone
Key Features:
- For Indie Films, TV & Documentaries
- High Sensitivity Requires Less Gain
- Phantom Powered
- Simple Operation with No Controls
- Smooth On-Axis Tone
- Gentle Presence Boost
- Windscreen Reduces Wind Noise
- Compact and Lightweight Housing
10,400 EGP
2-4 Days Delivery
Audio-Technica AT875R Overview:
With its smooth on-axis tone, great off-axis rejection, and straightforward operation, the Audio-Technica AT875R short shotgun microphone is well suited for budget-conscious indie films, TV shoots, nature recording, and documentary projects where simplicity and quality sound are prioritized.
The AT875R’s high sensitivity allows it to perform reliably with a variety of microphone preamp classes. Its full-spectrum frequency response utilizes a gentle increase in high frequencies to enhance intelligibility and compensate for loss in clarity resulting from wind protection.
The durable housing ensures rugged dependability while maintaining a light weight that won’t burden your boompole or camera, and the included accessories accommodate mounting the AT875R to a mic stand, boompole, or camera-mount microphone holder.
Quality Sound
Being less than 7″ long, the AT875R is equally at home on a boompole or atop a camera. It uses an interference tube and a supercardioid polar pattern to yield focused on-axis directionality while attenuating rear-entry sound and rejecting sound at the sides. This makes the AT875R far more effective at capturing distant sources than the omnidirectional mics found in most cameras. Its 90 Hz to 20 kHz frequency response naturally reduces problematic bass frequencies from common sources such as traffic rumble and wind noise.
11 to 52 VDC Phantom Powered
With a balanced 3-pin XLR output and support for 11 to 52 VDC phantom powering, the AT875R is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.
Ideal for Boompole Mounting
The AT875R includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the AT875R in the Audio-Technica AT8415 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic. The AT875R also includes two rubber O-rings that expand the microphone’s diameter to fit the larger mic holders found on many high-end cameras.
Windscreen Minimizes Wind Noise
The AT875R has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. Enhanced attenuation of wind noise is possible with the addition of an optional windshield such as the Rycote 12 cm Super-Softie, which also provides high immunity to rain.
For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the separately available Rycote Windshield Kit 3, a complete windjammer, windshield, and shockmount suspension system.
| Microphone Primary Applications | Broadcast |
|---|---|
| Form Factor | Stand/Boom Mount |
| Intended Sound Sources | Speech/Voice Over |
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Capsule | 1 x Electret Condenser |
| Polar Pattern | Lobar, Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Windscreen | Foam (Included) |
| Frequency Range | 90 Hz to 20 kHz |
| Maximum SPL | 127 dB SPL (1 kHz, 1% THD) |
| Off-Axis Rejection | 5 dB at 60° >25 dB at 120° >20 dB at 180° |
| Impedance | 100 Ohms |
| Sensitivity | -30 dBV/Pa |
| Dynamic Range | 107 dB (Typical, 1 kHz, at Max SPL) |
| Signal-to-Noise Ratio | 74 dB (1 kHz, at 1 Pa/94 dB SPL) |
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| 1 x XLR 3-Pin Male (on Mic) | 11 to 52 V (Phantom Power) |
| Operating Current Consumption | 2 mA |
| Color | Black |
| Mounting | Mic Clip/Stand Adapter (Included) |
| Mounting Thread Size | 5/8"-27 Female (3/8"-16 Female with Included Adapter) |
| Included Case | Pouch |
| Included Filters | None |
| Dimensions | ø: 0.83 x L: 6.89" / ø: 21 x L: 175 mm |
| Weight | 2.8 oz / 79 g |
In The Box
- Audio-Technica AT875R Short Shotgun Microphone
- Audio-Technica AT8405a Snap-in Microphone Stand Clamp
- 5/8″-27 to 3/8″-16 Threaded Adapter
- Foam Windscreen
- 2 x O-Rings
- Soft Protective Pouch
There are no reviews yet.