,

Behringer XENYX QX1002USB 10-Channel USB Mixer with Multi-FX Processor

Behringer
Key Features:
  • 2 XENYX Mic Preamps, 48V Phantom
  • 4 Stereo Line Inputs
  • Klark Teknik 24-Bit Multi-FX Processor
  • Built-In Stereo USB Interface
  • British-Style 3-Band EQs
  • Built-In One-Knob Compressors
  • 130 dB of Dynamic Range
  • FX Send for Each Channel
  • Main Mix and Control Room Outputs
  • Compact and Portable Design

Behringer QX1002USB Overview:

The Behringer XENYX QX1002USB is a mixer that offers clear and natural sound in a compact and portable format. With ten inputs, two high-quality XENYX mic preamps, a multi-FX processor with legendary Klark Teknik reverb, and a USB interface, this versatile mixer is ideal for a wide variety of mix and recording applications, from small-stage gigs to home-studios, mid-size corporate events, and more.

The XENYX QX1002USB is quick to set up and operate with all connections and controls easily reachable on the top of the unit. The first two input channels feature XENYX mic preamps, which deliver 130 dB of dynamic range, low-distortion signals, and a wide frequency response extending from 10 Hz to 200 kHz. Switchable 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones. These channels also offer two 1/4″ inputs for line-level signals.

Each mono channel features a British-style, 3-band EQ to provide warm and musical tone corrections for your vocals and instruments, as well as an easy-to-use, “one-knob” compressor to gently smooth out signal peaks for punchy and present bass lines, drums, and vocals that sit right in the mix. Gain knobs let you adjust the input levels and clip LEDs alert you when the signal is too high and about to distort.

The four sets of stereo inputs feature +4/-10 switches used to match the mixer’s input sensitivity to the incoming signal. This helps avoid signal degradation when connecting stereo keyboards or playback devices to the mixer. Pan (or balance) and level controls are included for all channels.

To add depth and dimension to your mix, the built-in, Klark Teknik 24-bit multi-FX processor offers 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and a variety of multi-effects. Each channel is equipped with a post-fader FX send, which you can use to send signal to the onboard FX processor or to an external processor. The FX-to-Main knob allows you to control the level of the effect in your main mix. There is also a built-in, stereo USB audio interface for recording your mix directly to a computer. It even comes with the recording and editing software needed to turn your computer system into a complete home recording studio.

The 2-Track section provides an easy way to connect an external 2-track recorder and/or playback device. The 2-Track inputs are assignable to either the main mix or to the control room/phone outputs. The main mix fader controls the signal at both the main outs and 2-Track output, while a dedicated knob adjusts the volume for the phone/control room outputs.

Number of Analog Input Channels

10

Number of Mic Preamps

2

Analog Output Channels

1 x Stereo Master Output
1 x Stereo Control Room/Monitor Output
1 x Mono FX Send Output
1 x Stereo Tape/Record Output
1 x Stereo Headphone Output

Gain/Trim Range

1/4" Line Input:
-10 dB to +40 dB
Line Input:
-10 dB to +40 dB
Mic:
+10 dB to +60 dB
Stereo Line Input:
+4 dBu / -10 dBV

EQ Parameters

High: ±15 dB at 12 kHz
Mid: ±15 dB at 2.5 kHz
Low: ±15 dB at 80 Hz

Built-In Effects

Yes

Sample Rates

AD/DA Conversion:
48 kHz
DSP:
40 kHz

DSP

24-Bit Delta-Sigma

Frequency Response

Mic Input:
10 Hz to 150 kHz -1 dB
10 Hz to 200 kHz -3 dB

Max Input Level

1/4" TRS Line Input:
+21 dBu at Unity Gain (Mono)
+22 dBu (Stereo)
Mic Input:
+12 dBu at +10 dB Gain
RCA Tape Input:
+21 dBu

Output Level

1/4" Control Room Output:
+21 dBu at Max Gain
1/4" Headphone Output:
+21 dBu at Max Gain (into 22 Ohms)
1/4" Main Output:
+21 dBu at Max Gain
FX Send:
+21 dBu at Max Gain

I/O Impedance

1/4" Control Room Output:
120 Ohms (Balanced)
1/4" TRS Line Input:
20 Kilohms (Balanced)
10 Kilohms (Unbalanced)
1/4" TRS Main Output:
120 Ohms (Balanced)
1/4" TRS Stereo/Line Input:
20 Kilohms (Balanced)
10 Kilohms (Unbalanced)
FX Send:
120 Ohms
Stereo RCA Input:
19.5 Kilohms
Stereo RCA Output:
1 Kilohms
XLR Mic Input:
1.9 Kilohms (Balanced)

EIN

-133 dB (0-Ohm Input)
-137 dB (A-Weighted, 0-Ohm Input)
-130 dB (50-Ohm Input)
-134 dB (A-Weighted, 50-Ohm Input)
-127 dB (150-Ohm Input)
-131 dB (A-Weighted, 150-Ohm Input)

Noise Floor

-105 dB Unweighted (Master Level at -∞, Channel Levels at -∞)
-108 dB A-Weighted (Master Level at -∞, Channel Levels at -∞)
-93 dB Unweighted (Master Level at Unity, Channel Levels at -∞)
-96 dB A-Weighted (Master Level at Unity, Channel Levels at -∞)
-83 dB Unweighted (Master Level at Unity, Channel Levels at Unity)
-85 dB A-Weighted (Master Level at Unity, Channel Levels at Unity)

SNR

Mic Input:
107 dB
110 dBA at +22 dB Gain (0 dBu Reference)

THD+N

Mic Input:
0.006% (Unweighted)
0.0045% (A-Weighted)

Analog Inputs

1 x Stereo RCA Coaxial Unbalanced 2-Track Input
2 x 1/4" TRS Balanced Line Input
2 x XLR 3-Pin Balanced Mic Input
8 x 1/4" TRS Balanced Line Input (4 Stereo Pairs)

Analog Outputs

1 x 1/4" TRS Balanced FX Send
1 x 1/4" TRS Headphone Output
1 x Stereo RCA Coaxial Unbalanced 2-Track Output
2 x 1/4" TRS Balanced Control Room Output
2 x 1/4" TRS Balanced Main Output

Phantom Power

+48 V, Selectable On/Off

USB

1 x USB Type-B

USB I/O Capacity

2 x Input / 2 x Output

AC Input Power

120 VAC, 60 Hz

Power Consumption

20 W

In The Box

  • Behringer XENYX QX1002USB 10-Channel USB Mixer with Multi-FX Processor
  • PSU6-UL Power Supply

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Behringer XENYX QX1002USB 10-Channel USB Mixer with Multi-FX Processor”

There are no reviews yet.

SHOPPING CART

close