-10%
, ,

Rode VideoMic GO Lightweight On-Camera Microphone

Rode

Key Features:

  • Mobile Journalist, Vlogger, Run & Gun
  • For Cameras and Portable Recorders
  • Runs on Plug-In Power
  • Simple Operation with No Controls
  • 3.5mm TRS Output Jack
  • Detachable Coiled 3.5mm Cable
  • Compact and Lightweight
  • Windscreen Reduces Wind Noise
  • Integrated Shoe/Pole Shockmount

6,500 EGP 7,200 EGP

  2-4 Days Delivery

Rode VideoMic GO Overview:

 

The VideoMic GO Lightweight On-Camera Microphone from Rode is a lightweight microphone which adds high-quality audio recording to your small camcorder and HDSLR camera. At only 2.6 ounces, the microphone keeps your camera setup lightweight, making it ideal for handheld shooting. It features an integrated Rycote Lyre shock mount for isolation from bumps and vibration, and offers battery-free operation, using instead the plug-in power from your camera’s 3.5mm microphone input. Please note that the microphone will not work with cameras that don’t supply plug-in power to their 3.5mm audio input jack.

The VideoMic GO is a directional microphone. It utilizes a supercardioid polar pattern to attenuate sounds from the sides, resulting in a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances. The integrated shoe mount provides a 3/8″ thread for additional mounting options. A foam windshield and 7.9″ dual mono 3.5mm coiled output cable is included.

Lightweight Design
At only 2.6 ounces, the VideoMic GO is ideal for run-and-gun HDSLR recording without the additional weight of larger on-camera microphone options.
Integrated Rycote Lyre Shock Mount
Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and won’t wear out, sag, snap, or require any rethreading to maintain its effectiveness.
No Battery Needed
The VideoMic Go does not require batteries for operation, but instead uses the plug-in power supplied via your camera’s 3.5mm microphone input. Simply plug in, and you’re ready to record.
Additional Features
  • Reinforced ABS construction
  • Foam windshield
  • Integrated shoe mount with 3/8″ thread
  • 3.5mm TRS mini-jack audio output connection
Form Factor

Stand/Boom Mount

Sound Field

Mono

Operating Principle

Line Gradient

Capsule

Electret Condenser

Diaphragm

0.5" / 12.70 mm

Polar Pattern

Supercardioid

Orientation

End Address

Circuitry

Solid-State (JFET)

Windscreen

Foam (Included)

Frequency Range

100 Hz to 16 kHz

Maximum SPL

120 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)

Off-Axis Rejection

4 dB at 60°
16 dB at 120°
12 dB at 180°

Sensitivity

-35 dBV/Pa at 1 kHz

Dynamic Range

96 dB

Signal-to-Noise Ratio

60 dB A-Weighted

Equivalent Noise Level

34 dB A-Weighted

Output Connectors (Analog)

1 x 1/8" / 3.5 mm TRS

Cable Length

7.87 to 13.78" / 20 to 35 cm

Number of Conductors

2

Wireless Connectivity

None

Operating Voltage

2.5 V

Operating Current Consumption

330 µA (Plug-In Power)

color

Black

Mounting

Camera/Shoe-Mount, Shockmount (with Included Hardware)

Mounting Thread Size

3/8"-16 Female

Included Case

None

Construction Material

ABS

Weight

In The Box

  • Rode VideoMic GO Camera-Mount Shotgun Microphone
  • Coiled 3.5mm TRS Cable

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rode VideoMic GO Lightweight On-Camera Microphone”

There are no reviews yet.

SHOPPING CART

close