No products in the cart.
Accessories
Showing 1–48 of 62 results
-
Accessories, Audio, Location Sound Microphones
Dragonpad USA 6inch Microphone Studio Pop Filter with Clamp – Black
Accessories, Audio, Location Sound MicrophonesDragonpad USA 6inch Microphone Studio Pop Filter with Clamp – Black
Key Features:
- Economical solution to help get your best vocal recordings
- Wind Screen
- Convenient and easy use. Swivel mount for easy installation
- Protects your microphone from surplus spit caused by over eager performers
- 360 degree flexible gooseneck holder, convenient for use
SKU: B008AOH1O6 -
Accessories, Audio
InnoGear Microphone Suspension Mic Clip Adjustable Boom Studio Scissor Arm Stand for Blue Yeti Snowball Microphone
Accessories, AudioInnoGear Microphone Suspension Mic Clip Adjustable Boom Studio Scissor Arm Stand for Blue Yeti Snowball Microphone
- Upgraded Desk Mount: Compared with old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2″ to fit most desktop.
- The Diameter of Microphone Clip is 1.10″. Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc. Attach your Blue Snowball and Blue Yeti with the 5/8″-27 male to 3/8″-16 female threaded screw adapter.
- Note：The mounting hole on the Yeti Mic is sometimes just a tiny fraction bigger than the 5/8’’ industry standard. Suggestion: Please use Thread Tape (included) to wrap around the mounting screw on your shock mount, effectively increasing the thickness of the mounting screw, while still maintaining the actual screw thread, so you can connect your Yeti.
SKU: B01L3LL95O -
Accessories, Audio
Focusrite Scarlett Solo 2×2 USB Audio Interface (3rd Generation)
Key Features:- Singers, Guitarists, Solo Podcasters
- USB Type-C Connectivity
- 1 Mic Preamp & 1 Instrument/Line Input
- 1 Headphone Out, Stereo Monitor Out
- 24-Bit / 192 kHz Converters
- Bus Powered / Mac, Windows, iPad Pro
- Phantom Power, Direct Monitor
- Mic Air Mode, Multicolor Gain Halos
- Compact, Rugged Housing
- DAWs, VIs, Loops & Samples
SKU: FOSCARSOLO3G -
-
-
-
Accessories, Audio
Zoom APH-6 Accessory Pack for the Zoom H6 Handy Digital Recorder
Key Features:
- Wired Remote Controller
- Hairy Windscreen
- AC Adapter
- The APH-6 Accessory Pack is an accessory for the Zoom H6 Handy digital recorder. It includes the RCH-6 wired controller for remote access to your H6, the AD-17 USB-type AC adapter, and the WSH-6H Hairy
- Windscreen for improved wind diffusion.
SKU: ZOH6AP -
Accessories, Location Sound Wireless Microphones
Zoom SGH-6 Shotgun Microphone Capsule for H5 and H6 Recorders
Accessories, Location Sound Wireless MicrophonesZoom SGH-6 Shotgun Microphone Capsule for H5 and H6 Recorders
Key Features:
- Use with the H5 and H6 Recorders
- Directional Shotgun Mic
- Three Internal Microphones
- Built-In Preamp
- Super-Cardioid Polar Pattern
- Designed for Film, ENG and More
- Hairy Windscreen Included
SKU: ZOSGH6 -
Accessories, Audio
Comica Audio CVM-AX3 Dual-Channel Audio Mixer for DSLRs
Key Features:- Battery-Powered, Camera-Mount Mixer
- Selectable Phantom & Plug-In Power
- 2 x XLR-1/4″ Combo Inputs
- 3 x 3.5mm Mini-Jack Inputs
- Dual Gain Control Knobs
- 3.5mm Main & Aux Outputs
- 3.5mm Headphone Output
- Mono/Stereo Output Switch
- Up to 40 Hours of Battery Life
- Built-In Cold Shoe Mounts
SKU: COCVMAX3 -
-
Accessories, Audio
Auray PFSS-55 Pop Filter with Gooseneck with Springloaded Clamp (5.5inch Pop Filter and 13.5inch Gooseneck)
Accessories, AudioAuray PFSS-55 Pop Filter with Gooseneck with Springloaded Clamp (5.5inch Pop Filter and 13.5inch Gooseneck)
Key Features:- 5.5˝ Double-Layered Nylon
- 13.5˝ Gooseneck
- Prevents Vocal Pops
- Protects Mic from Corrosive Moisture
- Clothespin Clamp for Desks and Stands
- Locking Nut for Secure Hold
- Spring-Loaded Clamp for Easy Mounting
SKU: PFSS-55 -
Accessories, Audio
Zoom U-44 Audio Interface
Key Features:
- Musicians, Songwriters, and Producers
- USB Type-A Connectivity
- 2 Mic Preamps, Zoom Mic Capsule Input
- 1 Headphone Output, 4 Line Outputs
- Up to 24-Bit / 96 kHz Resolution
- Battery or Bus Power / Mac, Windows, iOS
- Phantom Power, Zero-Latency Monitoring
- Tactile Controls
- MIDI and S/PDIF I/O, Output Mute Buttons
- DAW Software and iPad App
SKU: ZOZU44 -
Accessories, Audio, Studio Recording
Auray WHF-158 Foam Windscreen for 1-5-8inch Diameter Microphones
Accessories, Audio, Studio RecordingAuray WHF-158 Foam Windscreen for 1-5-8inch Diameter Microphones
Key Features:- High-Quality Acoustic Foam
- Reduces Wind Noise up to 8 dB
- Reduces Vocal Plosives
- Protects Mic from Moisture and Dirt
- For Microphones 1-5/8″ in Diameter
- Colors Help You Identify Mics Onstage
SKU: AUWHF158 -
Accessories, Audio
NB-39 Adjustable 110cm Studio Microphone Suspension Boom Scissor Arm Stand
Max. Microphone Clip Diameter is 1.26″/32mm. 2.Microphone and Filter Shield Mask NOT Included. Composed of 2 pieces: (1)Scissor Arm Stand with Handheld Microphone Clip for Handheld Microphone and (1)Table Mounting Clamp. The scissor arm stand is made out of all steel construction, sturdy and durable Folding type, convenient to carry. Stable, tough, and affordable. Can be mounted on the announcers’ table. The double-braced arms add strength. Your microphone is held safely on this scissor arm microphone clip
SKU: NB-39 -
Accessories, Audio
Tripod Boom Microphone Stand
Key Features:
Tripod boom microphone stand holds microphone securely in place (microphone clip sold separately) Long boom arm with molded plastic counterweight for horizontal placement Versatile design folds flat for use as straight mic stand Sturdy steel construction; ultra-light for easy transport Compatible with 3/8-inch to 5/8-inch adapter; clip-on cable holder keeps cords out of the way Please note the following while using this product: Max microphone weight ≤ 1KG (2 lbs). Microphone end of the boom should be lined up with one of the legs. Do not extend length further than 2/3 of the whole boom. To be used only on flat ground. If using heavy microphone, add a sandbag or weight on the rear of the boom to provide balance.
SKU: TBMS -
Accessories, Audio
On-Stage MA-100 3-8inch Male to 5-8inch Female Mic Screw Adapter
Key Features:
- Our MA-100 3/8″ Male to 5/8″ Female Mic Screw Adapter quickly and easily allows European booms and accessories to fit standard stands.
- This adapter features a knurled outer flange for ease of tightening and loosening. Chrome finish.
- Converts mic stands from 5/8″ male to 3/8″ male threading
- Knurled outer flange increases grip for ease of tightening and loosening
- Enables use of standard mic stands with European mic accessories
SKU: ONMA100 -
-
Accessories, Audio, Location Sound Wireless Microphones, Microphones
Audio-Technica AT899cH Subminiature Omnidirectional Condenser Lavalier Microphone (Black)
Accessories, Audio, Location Sound Wireless Microphones, MicrophonesAudio-Technica AT899cH Subminiature Omnidirectional Condenser Lavalier Microphone (Black)
Key Features:- For Stage and Broadcast
- 20 Hz to 20 kHz Frequency Response
- 11 to 52V Phantom Power
- 4-Pin XLR Output Connector
- Frequency Roll-Off Switch
- Windscreens Included
- Carrying Case Included
SKU: AUAT899CH -
Accessories, Audio
Audio-Technica Wideband UHF In-Line Antenna Boosters (Pair- 470-990 MHz)
Key Features:
- UHF (470-990 MHz) in-line antenna boosters (pair) increase RF signal strength (6dB/12dB gain switch) to compensate for antenna cable loss. For use with Audio-Technica UHF receivers and RF Venue antenna distribution systems and other devices providing 12V DC antenna power.
SKU: AUATWB80WB -
-
-
-
Accessories, Audio
Pop Filter-PEMOTech [Upgraded Three Layers] Metal Mesh Foam Etamine Layer Microphone Windscreen Cover
Accessories, AudioPop Filter-PEMOTech [Upgraded Three Layers] Metal Mesh Foam Etamine Layer Microphone Windscreen Cover
Key Features:
- THREE LAYERS FILTER MIC SHIELD – Three layers design include foam layer, metal net layer and basic etamine layer can effectively reduces the plosive, pops, crackles, wind interference, breath sounds when recording vocals. Absolutely necessary for recording, speaking or singing. This studio mic shield isolation helps to get your best vocal recording.
- MAINTAIN CLEAN – Metal mesh matches plastic frame in a special appearance design. Functionally prevents saliva, keeping cleanness for your microphones and protecting your microphone.
- EASY TO SET UP – Handy and quick to assemble and disassemble from the microphone and firmly fixed on your mic with the combination design of elastic bands and inner rubber ring, Special design perfectly matches with your microphones.
SKU: B01J5OTVTC -
-
Accessories, Audio
Saramonic SR-AX100 Passive 2-Channel Audio Adapter for DSLR Cameras
Key Features:- Combine Two Mics to One Stereo Output
- Sum a Stereo Input to a Mono Output
- 3.5mm Mono and Stereo Inputs
- 3.5mm Stereo Output
- Left and Right Trim Controls
- Mono/Stereo Output Mode Switch
- Passive Design Requires No Power Source
- Includes Coiled 3.5mm Cable
SKU: SASRAX100 -
Accessories, Audio
Behringer FBQ1000 Automatic and Ultra-Fast Feedback Destroyer-Parametric EQ with 24 FBQ Filters
Accessories, AudioBehringer FBQ1000 Automatic and Ultra-Fast Feedback Destroyer-Parametric EQ with 24 FBQ Filters
Key Features:
- High-performance 2-channel Feedback Destroyer and Parametric EQ
- Automatically and “intelligently” locates and destroys up to 24 frequencies
- Ultra-narrow FBQ filters for extremely effective feedback suppression, while keeping highest sonic quality
- “Set-and-forget” default setting enables immediate and super-easy Feedback Destroyer performance
- Auto mode continuously monitors the mix and automatically sets filters
SKU: FBQ1000 -
Accessories, Audio
Zoom EXH-6 Dual XLR-TRS Combo Input Capsule for H5- H6- and F4 Recorders
Key Features- Use with H5, H6, and F4 Recorders
- Adds 2 XLR/TRS Combo Inputs
- Adds 2 Preamps
- -20 dB Pad on Each Channel
- Record up to 4 Mic/Line Signals with H5
- Record up to 6 Mic/Line Signals with H6
- Record up to 6 Mic/Line Signals with F4
SKU: ZOEXH6 -
Accessories, Audio, Professional Amplifier
TRITON AUDIO FetHead Phantom In-Line Microphone Preamp
Key Features- For Condenser Microphones
- Low-Noise Class-A JFet Amplifier
- 18 dB Amplification
- Double Single-Ended Amplifier Topology
- Input Pins with 28-48V Phantom Power
- Balanced Output with High Headroom
SKU: TRFETHDPHNTM -
-
Accessories, Audio
K&M 23230 Tabletop Microphone Stand (Black)
Key Features:
Interesting Perspective! Affordable table microphone-stand in a new attractive form, compact and practical. The low stand with its distinctive trilobular base (triangle form) holds the microphone reliably and securely in place. The circular rubber insert ring filters foot step sounds, reduces the transmission of unwanted sounds and provides a non-slip vibration-free stand.
SKU: KM23230 -
Accessories, Audio
K&M 23765 4-Piece Aluminum Microphone Boompole (Black)
Key Features:
- Durable, Lightweight Aluminum
- Adjustable Length from 3.3 to 10.6′
- 4-Piece Telescopic Design
- 5/8″ Male Threaded Connector
- Clamp Lever Locking Mechanisms
- Accommodates Cables Inside Pole
- Includes Upholstered Carrying Case
SKU: KMM4PFPB -
-
Accessories, Audio
Rode AI-Micro Ultracompact 2×2 USB Type-C Audio Interface
Key Features:- Podcasters, Interviewers, Content Makers
- Connect Lightning, USB Type-A, and USB-C
- 2 Auto-Sensing TRS/TRRS Mic Inputs
- 1 Headphone Output
- Up to 24-Bit / 48 kHz Resolution
- Bus Powered / Mac, Windows, iOS, Android
- Zero-Latency Monitoring
- Expanded Functionality via Rode Apps
- Ultracompact and Portable Form Factor
SKU: ROAIMICRO
