Genelec 8351B SAM Studio Monitor (Black Finish)
Key Features:
- 38 Hz to 20 kHz Frequency Response
- Dual 8.625″ Acoustically Concealed Woofers
- Minimum Diffraction Coaxial Driver
- Accepts Analog or AES/EBU Signal
- Outputs AES/EBU Signal for Linking
- Directivity Control Waveguide
- SAM Technology for Automatic Tuning
- Networkable via GLM Software
- Minimum Diffraction Enclosure
- Iso-Pod Stand Included
201,405 EGP
2-4 Days Delivery
Genelec 8351B SAM Overview:
Styled in a black finish, the Genelec 8351B is a point-source, near-field monitor for pro-audio applications. It features a coaxial design, which houses its midrange driver, treble tweeter, and dual 8.6” woofers in one enclosure, thereby aligning their acoustical axes and ensuring an accurate point of sonic radiation. The monitor can accept both analog and digital AES/EBU signals from separate XLR jacks, and uses Intelligent Signal Sensing technology (ISS) to detect automatically if audio is being fed into the monitor to save energy when no signal is present. This monitor provides a frequency response of 38 Hz to 20 kHz (±1.5 dB), at a maximum SPL of 113 dB at 1m.
To coordinate multiple 8351Bs, you can make use of Genelec’s GLM software to tune your monitor to your room, facilitate and coordinate daisy-chaining monitors, override the ISS function, and more. Routing is accomplished by means of a few Cat5 (RJ45) cables and a GLM adapter. You’ll note that two RJ45s are provided for GLM connectivity. An XLR output jack is also on hand for sending identical copies of incoming AES/EBU signals to other monitors.
DIP switches and a rotary control for level are offered on the rear of the monitor for offline use. Use these switches to tune the monitors to your room without DSP if needed. An Iso-Pod stand is included to facilitate isolation from aurally deleterious surfaces. Other assets, such as the 8351B’s acoustically concealed woofers, minimum diffraction coaxial construction, and a proprietary waveguide, are further expounded upon in the features section.
Monitor Type & Configuration | Active 3-Way |
---|---|
Number of Included Monitors | Single Monitor |
Enclosure | Bass-Reflex/Ported, Shielded |
Total Power Output | 550 W |
Tweeter | 1 x 1" / 25.4 mm Metal Dome |
Midrange | 1 x 5" / 12.7 cm Cone |
Woofer | 2 x 8.63" / 21.92 cm Oval Cone |
Amplifiers | HF: 1 x 150 W MF: 1 x 150 W LF: 1 x 250 W |
Frequency Range | 32 Hz to 43 kHz (-6 dB) |
Frequency Response | 38 Hz to 20 kHz ± 1.5 dB |
Total Harmonic Distortion (THD) | 0.05% |
Maximum Input Level | +25 dBu (Balanced) |
Analog Input Sensitivity/Gain | +36 to -6 dBu (Continuously Variable) |
Self-Generated Noise | Less Than 5 dB (at 328' / 1 m) |
Protections and Limiting | Driver Protection |
EQ | 1 x LF Tilt: -2 to -6 dB at 800 Hz 1 x HF Tilt: 2 to -4 dB at 5 kHz 1 x Low-Mid Shelf: -4 dB at 160 Hz |
Crossover Frequency | Low-Pass: 320 Hz High-Pass: 2.8 kHz |
App-Based Signal Processing | GLM Software Adjustment Parametric Notch Filter Low Shelf EQ High Shelf EQ |
Maximum Sampling Rate | 192 kHz / 24-Bit |
Audio I/O | 1 x XLR 3-Pin Balanced Input (10 Kilohms) |
Digital Audio I/O | 1 x XLR 3-Pin AES3 Input 1 x XLR 3-Pin AES3 Out/Thru |
Network I/O | 2 x RJ45 Ethernet |
USB | None |
Wireless | None |
AC Input Power | 100 to 240 VAC, 50/60 Hz |
Power Consumption | 16 W (Idle) 250 W (Maximum) |
Color | Black |
Dimensions | 11.3 x 17 x 10.9" / 28.7 x 43.3 x 27.8 cm (Each) |
Weight | 31.0 lb / 14.1 kg (Each) |
Package weight | 38.145 lb |
Box dimensions lxwxh | 24.8 x 16.2 x 16.1" |
In The Box
- Genelec 8351B SAM Studio Monitor (Black Finish)
- Mains Power Cable
- GLM Network Cable (16.4″ / 5m)
There are no reviews yet.