Rode NT2-A Large-Diaphragm Multipattern Condenser Microphone
- For Vocals and Instruments
- Cardioid, Omni & Figure-8 Polar Patterns
- Pad Switch at -5 or -10 dB
- High-Pass Filter at 40 or 80 Hz
- Shockmount Inhibits Vibration Noise
- Large 1″ Gold-Sputtered Diaphragm
- Transformerless Output Stage
- Pop Filter Controls Vocal Plosives
- XLR Cable for Hookup to Mic Preamp
- Operates on 24 or 48 VDC Phantom Power
1,292,500 EGP
2-4 Days Delivery
Rode NT2A Overview:
Combining a true condenser capsule, three selectable polar patterns, and ultralow-noise circuitry, the Rode NT2-A large-diaphragm studio microphone offers a clear and smooth sonic signature along with versatile pickup responses, making it ideal for all sorts of voice and instrument sources at home or in the studio. Plus, its bundle of accessories—shockmount, pop filter, XLR cable, and dust cover—help the NT2-A serve vocalists, rappers, and voice-over artists especially well.
With low noise being a top priority of the NT2-A, its 1″ gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Enhancing its professional character are the onboard pad (-5 or -10 dB) and high-pass filter (40 or 80 Hz) settings, which help avoid distortion and bass builup. Since it can run on 24 or 48 VDC phantom power, the NT2-A can be used with a variety of professional and entry-level XLR mic preamps.
Large-Diaphragm True Condenser
Three Polar Patterns
Special Voicing
Transformerless Output
48V Phantom Power
Accessory Package
Features at a Glance
- True condenser (externally biased)
- Large 1″ HF1 capsule with gold-sputtered diaphragm
- Cardioid, figure-8, and omnidirectional polar patterns
- Self-noise of only 7 dBA
- Transformerless JFET active circuitry
- Wide dynamic range
- XLR 3-pin output connector
- Runs on phantom power
- Internally shock-mounted capsule
- Includes SM6 shockmount, pop filter, and dust cover
| Primary Applications | Studio Recording |
|---|---|
| Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
| Intended Sound Sources | Vocals, Speech/Voice Over, Instrument |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | Condenser |
| Diaphragm | 1" / 25.40 mm |
| Polar Pattern | Cardioid, Figure-8, Omnidirectional |
| Pattern Selection | Switched (Adjustable on Mic) |
| Orientation | Side Address |
| Circuitry | Solid-State (JFET) |
| Pad | -5 dB -10 dB |
| High-Pass Filter | 40 Hz 80 Hz |
| On-Board Controls | High-Pass Filter, Pad, Polar Pattern |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) 157 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad) |
| Impedance | 200 Ohms |
| Sensitivity | -36 dBV/Pa at 1 kHz |
| Output Level | 16 mV (Max, 1 kHz) |
| Dynamic Range | 140 dB |
| Signal-to-Noise Ratio | 87 dB A-Weighted |
| Equivalent Noise Level | 7 dB SPL A-Weighted |
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| Length | 6.1 m |
| Voltage | 24 V, 48 V |
| Included Case | Mic Sock |
| Included Filters | Pop Filter |
| Color | Silver |
| Mount | Shockmount (Included) |
| Dimensions | ø: 55 x L: 209 mm |
| Weight | 0.86 kg |
In The Box
Rode NT2-A Large-Diaphragm Multipattern Condenser Microphone
Rode SM6 Shock Mount with Detachable Pop Filter
XLR Mic Cable (20′)
Dust Cover
There are no reviews yet.