Showing 2497–2544 of 4678 resultsSorted by latest
Key Features:
Folding, Scissor-like Leg Design
Folds Flat for Portability
Supports Up to 1.1 lb (0.5 kg)
Ideal for Compact Cameras
Universal 1/4″-20 Mounting Thread
Stable Sure-Grip Rubber Tripod Feet
Swivels Into Position, Lever Locking
Weighs 2.2 oz (62 g)
Maximum Shooting Height of 3.3″ (8.4 cm)
Closed Height of 6.0″ (15 cm)
Key Features:
The EW-83E Lens Hood from Canon is a 77mm petal shaped lens hood designed for the 17-40mm f/4L USMÂ and the 10-22mm EF-S lenses.
Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
The Impact Backlight Stand Base is a sturdy, all-steel lighting accessory that is ideal for low-angle applications such as mounting lighting fixtures and other accessories close to the floor or at table level. A 5/8″ Baby receiver is built-in for mounting a light stand riser. With a footprint diameter of 20 inches, the rubber-tipped, tri-leg base provides stability and prevents slipping on a smooth surface. It sets up quickly, and the legs fold flat for easy moving and storage.
Key Features:
The Hoya 82mm Neutral Density (NDX8) 0.9 Filter has several uses and offers the possibility to achieve otherwise unachievable results. ND filters appear gray and reduce the amount of light reaching the film. They have no effect on color balance.
Multi-coated to minimize reflection at the filter surfaces which reduces flare and ghosting.
Key Features:
The Hoya 77mm Neutral Density (NDX8) 0.9 Filter has several uses and offers the possibility to achieve otherwise unachievable results. ND filters appear gray and reduce the amount of light reaching the film. They have no effect on color balance.
Multi-coated to minimize reflection at the filter surfaces which reduces flare and ghosting.
Key Features:
The Hoya 72mm Neutral Density (NDX8) 0.9 Filter has several uses and offers the possibility to achieve otherwise unachievable results. ND filters appear gray and reduce the amount of light reaching the film. They have no effect on color balance.
Multi-coated to minimize reflection at the filter surfaces which reduces flare and ghosting.
The Hoya 52mm Neutral Density (NDX8) 0.9 Filter has several uses and offers the possibility to achieve otherwise unachievable results. ND filters appear gray and reduce the amount of light reaching the film. They have no effect on color balance.
Multi-coated to minimize reflection at the filter surfaces which reduces flare and ghosting.
The Manfrotto 577 Rapid Connect Adaptergives you the freedom to remove the camera from the head without detaching it from the plate. It includes the 501PL plate and is compatible with the 501PLONG camera plate as well. A 1/4″-20 screw and a 3/8″-16 bushing are included so you can use the plate with various cameras. Corresponding threaded holes on the side of the adapter allow you to store the screw that is not being used, so you can access it if and when you need it.
This RF-603C II Remote Flash Trigger Kit from Yongnuo features two 16 channel, 2.4 GHz transceivers as well as a shutter release cable for remote triggering of Canon cameras with a 2.5mm connection. Each transceiver has a male camera shoe on the bottom as well as a female hot shoe on top for triggering a flash unit. The system has a wireless range of 328′ and can sync at speeds up to 1/320 second. Additionally, it has a dual-function shutter release with half-press and full-press capabilities.
The transceivers can be placed in either single transmit or transceiver modes depending on your needs and can wake up flash units and cameras. Also, it has 2.5mm and PC sync ports for using additional cables in order to connect studio flashes or to different cameras. This kit comes with a shutter release cable for the 2.5mm connection. Also, each trigger runs on 2 AAA batteries.
Easily attaching your GoPro to any tripod or support device with a standard 1/4″-20 screw using GoPro Tripod Mounts. This package includes a three-prong mount adapter for attaching GoPro camera housings and frames, and a quick release base adapter for attaching GoPro housing and accessories equipped with a quick-release buckle. For table top and ground-level support, a lightweight mini tripod with integrated three-prong mount is also included.
Use this Dracast 60-Degree Honeycomb Grid for your LED500 panel to control light spill or prevent your light from washing out background lighting effects. It slides into the panel quickly and its thin design ensures convenient storage and transport.
Slim and smooth, the black Silicone Protection Cover for Nikon D810 from easyCover protects your camera body from bumps, scratches, sand and dust. The custom-fit silicone skin provides a secure grip, and there’s an included screen protector to shield the LCD.
Slim and smooth, the black Silicone Protection Cover for Nikon D7100 or D7200 from easyCover protects your camera body from bumps, scratches, sand and dust. The custom-fit silicone skin provides a secure grip, and there’s an included screen protector to shield the LCD.
The LC-E6 Battery Charger from Canon is designed for use with the for LP-E6 battery pack, which powers the Canon EOS 5D Mark II, 5D Mark III, 7D and 60D Digital SLR cameras. This unit can be used to charge a battery for these cameras from a standard electrical outlet. The charger operates on 100-240VAC power for worldwide use. Its 2-prong US plug goes directly into a wall outlet, so no power cord is required.
Key Features:
Key Features:
Key Features
Tilta Xeno Top Handle with NATO Clamp (Black) 
