PIXEL TIMER REMOTE CONTROL WIRELESS TW-283 FOR CANON

Description

With the Pixel Timer Remote Control Wireless TW-283/E3 you can trigger your Canon camera wirelessly, up to a distance of more than 80 meters. So you no longer have to touch the shutter release button of your camera or even be near your camera!

This multifunctional set supports five different modes. It allows you to remotely control your camera for a single photo (single shooting) or take a series of photos within 1 second (continuous shooting). In addition, the TW-283/E3 offers the BULB-shooting option, in which you determine the shutter speed. If your camera supports long shutter speed photography, you have the option to hold down the button on the remote control so that the shutter opens. When you release the button, the shutter will close again. You can also set a timer. In this mode (Delay shooting) you can set the timer between 1 and 59 seconds, where you can also determine the number of photos (1 to 59 photos). Finally, you can set up a Timer schedule shooting, up to a maximum of 99 hours, 59 minutes and 59 seconds. You can also freely set the number of photos to be taken between 1-99, 1-999 or infinity.

TW-283 is a type of multi-functional shutter remote control.

• Before operating this Timer Remote Control, please read the User Manual completely and save this manual for future use.
• Batteries – Please use four new batteries – Please install batteries correctly to the compartment according to the + and – terminal of the batteries.
• Please refer to your camera manual and connect the Receiver with the correct remote socket of camera. Make sure the cable is inserted to the end for good contact.
• This shutter control may not be able to fire the camera if the connecting cable is NOT inserted to the correct remote socket or not inserted to the end.
• Channel – The Transmitter and Receiver must be setted to the same channel.
• If the number of shots you want to take is less than 99, it is not needed to set Repeat Timer (REPEAT & N2).
• Please see the images of this product. There are some instructions shown in the images.

TW-283 E3/N3 Compatible Cameras: (This compatible camera list was updated on March 6, 2020)

• Compatible Cameras: (This compatible camera list was updated on January 13, 2020)
• For Canon Digital Rebel, XT, XTi, XS, XSi, T1i, T2i, T3, T3i, T4i, T5, T5i, T6i, T6S, SL1, EOS RP, 1300D, 1100D, 1000D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 60D, 60Da, 70D, 80D, 90D ; PowerShot: G10, G11, G12, G15, G16, G1X, G3X, G1XII, SX50 HS, SX60 HS;
• For Canon: EOS-1D X Mark II, 1D X, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, EOS D2000, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 5D Mark II, 5D, 6D, 6D Mark II, 7D Mark II, 7D, 50D, 40D, 30D, 20D, 10D, D60, D30, EOS-1V, EOS-3
• For Pentax: *ist D, *ist DL, *ist DS, *ist DS2, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K 1;
• For Samsung: GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5; For Contax: 645, N1, NX, N Digital; For Sigma: Sd1; For Hassleblad: H series. For Fujifilm X-T3, X-T30

Specification:

• System mode: FSK 2.4GHz wireless control system
• Communication channel: 30 channel
• Transmission distance:over 80m
• Transmitter Stand-by Time:over 1000hrs. (with 2 pcs AAA batteries)
• Receiver Stand-by Time:over 400 hrs(with 2 pcs AAA batteries)
• Transmitter Dimension (LxWxH): 146X40X19mm
• Receiver Dimension(LxWxH): 73x38x31mm
• Weight: Transmitter: 52.6g (excluding batteries) Receiver: 36.2g (excluding batteries)